94
FEM630 | ELECTROMAGNETIC FLOWMETER | OI/FEM630-EN REV. A
Menu / parameter Description
Communication
...HART
Selection of submenu ‘...HART’ using .
...Modbus
Selection of submenu ‘...Modbus’ using .
...Profibus
Selection of submenu ‘...Profibus’ using .
8 ...Operation
...Parameter descriptions
Menu: Communication
Communication / ...HART
Device Address
Selection of HART device address.
Note
Loop Current Mode
Selection of the operating mode for current output with HART communication.
• Multidrop Fixed
• Normal Signaling
HART Tag
Entry of a HART TAG number as unique identifier for the device.
HART Long Tag
Entry of a HART TAG number as unique identifier for the device.
HART Descriptor
Entry of a HART descriptor.
HART Message Display of the alphanumeric TAG number.
HART Manuf. ID
HART Device ID Display of the HART device ID.
HART Find
• Off: The transmitter does not respond to command 73.
• Once: The transmitter responds once to command 73.
• Continuous: The transmitter always responds to command 73.
Last HART Command Display of the most recently sent HART command.
To Next Page
Loading...
