ABB ProcessMaster FEM631 - Parameter Overview

67
FEM630 | ELECTROMAGNETIC FLOWMETER | OI/FEM630-EN REV. A
8 ...Operation
Parameter overview
Note
This overview of parameters shows all the menus and parameters available on the device. Depending on the version and
configuration of the device, not all of the menus and parameters may be visible in it.
Language
Unit Volumeflow Qv

Unit Vol. Totalizer
Pulses per Unit
Pulse Width
Upper Frequency
Damping

Curr.Out at Alarm
Low Alarm
High Alarm

QmaxDN Type
Meter Size
Qm Max DN
Qv Max DN
Mains Frequency
Exitation Freq
Coil Current Regul.
Set Point Curr.
DC feedback reg.
Sensor ID
Sensor Serial No.
Sensor Run Hours
...Se Calibration
Sensor TFE Function

Se Span
First Cal. Date
Last Cal. Date
Cal. Cert. No.
First Cal. Location
Last Cal. Location
...Sensor
...Transmitter
Device Info
Easy Setup