66
FEM630 | ELECTROMAGNETIC FLOWMETER | OI/FEM630-EN REV. A
8 ...Operation
...Selecting and changing parameter
Exiting the setup
For some menu items, values must be entered. If you don't
want to change the parameter, you can exit the menu as
described below.
1 Pressing (Next) repeatedly moves the cursor to the
right. Once the cursor reaches the end position, ‘Cancel’
is displayed in the lower right of the screen.
2 terminates editing and exits the menu item. Use to
return to the start.
Note
The LCD display automatically returns to the process display
three minutes after the last button has been actuated.
To Next Page
Loading...
