86
FEM630 | ELECTROMAGNETIC FLOWMETER | OI/FEM630-EN REV. A
Menu / parameter Description
Display
Language
Selection of menu language.
(German, English, French, Spanish, Italian, Chinese, Portuguese).
Contrast Contrast setting for the LCD display.
.
.
Autoscroll
If Autoscroll is enabled, the ‘Autoscroll’ function can also be activated on the information level of the operator
menu.
In this function, operator pages are automatically displayed in succession on the process screen, changing
necessary. When Auto scroll mode is enabled, the icon is displayed in the lower left corner of the screen.
Default setting: Disabled.
Flow Format
Tot Format
Date Format Set the display format for the date and time.
Display Tag
Configuration of the top line in the display.
Off, Sensor Location Tag, Bus Address, HART Address
Display Rotation
Display Test
Start the test of the LCD display with ‘
shown on the LCD display to check the display.
Description
Display Mode
Configure each operator page.
The following versions can be selected:
Selecting ‘Off’ deactivates the corresponding operator page.
Selection of process variable displayed in the respective row.
• Qv [unit]: Volume flow rate in the selected unit.
•
•
•
•
• CO1 Current: Output current in mA
• Qm [unit]: Mass flow in the selected unit.
•
•
•
•
• scaled velocity: Flow velocity
Bargraph
Selection of process variable displayed as a bar graph.
•
•
• CO1 Current: Output current in mA
8 ...Operation
...Parameter descriptions
To Next Page
Loading...
