ABB REF610 - Event Codes E17...E26

135
Channel Event Description Weighting
factor
Default
value
2 E15 SO5 activated 16384 0
2 E16 SO5 reset 32768 0
Default value of event mask 2V155 3
Table 5.1.17.1.-9 Event codes E17...E26
Channel Event Description Weighting
factor
Default
value
2 E17 DI1 activated 1 0
2 E18 DI1 deactivated 2 0
2 E19 DI2 activated 4 0
2 E20 DI2 deactivated 8 0
2 E21 DI3 activated 16 0
2 E22 DI3 deactivated 32 0
2 E23 DI4 activated 64 0
2 E24 DI4 deactivated 128 0
2 E25 DI5 activated 256 0
2 E26 DI5 deactivated 512 0
Default value of event mask 2V156 0
Channel 3
Table 5.1.17.1.-10 Event codes E1...E12
Channel Event Description Weighting
factor
Default
value
3 E1 Shot 1 initiated 1 1
3 E2 Shot 1 ended 2 1
3 E3 Shot 2 Initiated 4 1
3 E4 Shot 2 ended 8 1
3 E5 Shot 3 initiated 16 1
3 E6 Shot 3 ended 32 1
3 E7 CB position open 64 1
3 E8 CB position closed 128 1
3 E9 Definite trip alarm signal activated 256 1
3 E10 Definite trip alarm signal reset 512 1
3 E11 AR lockout signal activated 1024 0
3 E12 AR lockout signal reset 2048 0
Default value of event mask 3V155 1023
Feeder Protection Relay
Technical Reference Manual - ANSI Version
REF610REF610
1MRS755535