ABB REF610 - 7 Ordering Information; Ordering Key for Complete Relays

165
7. Ordering information
When ordering protection relays and/or accessories, specify the following:
*
Order number
*
HMI language set number
*
Quantity
The order number identifies the protection relay type and hardware as described in
the figures below and is labelled on the marking strip under the lower handle of the
relay.
Use the ordering key information in Fig. 7.-1 to generate the order number when
ordering complete protection relays.
REF610C55HCNP 01
Communication module:
P = plastic fiber
M = plastic fibre with input for arc protection
G = plastic and glass fiber
K = plastic and glass fibre with input for arc protection
R = RS-485
T = RS-485 with input for arc protection
D = RS-485 including DNP 3.0 protocol
E = RS-485 including DNP 3.0 protocol and input for arc protection
N = none
I/O extension module:
H = 3xSO and 3xDI (110/125/220/250 V DC)
L = 3xSO and 3xDI (24/48/60/110/125/220/250 V DC)
N = none
Power supply:
H = 100-240 V AC/110-250 V DC,
2xDI (110/125/220/250 V DC),
3xPO
2xSO
L = 24-60 V DC,
2xDI (24/48/60/110/125/220/250 V DC),
3xPO,
2xSO
Earth-fault current input:
5 = 5A
1 = 1A
2 = 0.2A
Phase-current inputs:
5 = 5A
1 = 1A
Language set:
01 = (IEC) English, Svenska, Suomi
02 = (IEC) English, Deutsch, Francais, Italiano, Español, Polski
11 = (ANSI) English, Español, Portugese
Revision
A040365_2
Fig. 7.-1 Ordering key for complete relays
Use the ordering key information in Fig. 7.-2 to generate the order number when
ordering spare units.
Feeder Protection Relay
Technical Reference Manual - ANSI Version
REF610REF610
1MRS755535