ABB REG650 - Generic Security Application Component AGSAL; Generic Security Application AGSAL; Security Events on Protocols SECALARM; Security Alarm SECALARM

Name Values (Range) Unit Step Default Description
ExtLogSrv4IP 0 - 18 IP
Address
1 127.0.0.1 External log server 4 IP-address
ExtLogSrv5Type Off
SYSLOG UDP/IP
SYSLOG TCP/IP
CEF TCP/IP
-
- Off External log server 5 type
ExtLogSrv5Port 1 - 65535 - 1 514 External log server 5 port number
ExtLogSrv5IP 0 - 18 IP
Address
1 127.0.0.1 External log server 5 IP-address
ExtLogSrv6Type Off
SYSLOG UDP/IP
SYSLOG TCP/IP
CEF TCP/IP
-
- Off External log server 6 type
ExtLogSrv6Port 1 - 65535 - 1 514 External log server 6 port number
ExtLogSrv6IP 0 - 18 IP
Address
1 127.0.0.1 External log server 6 IP-address
16.12 Generic security application component AGSAL
16.12.1 Generic security application AGSAL
As a logical node AGSAL is used for monitoring security violation regarding
authorization, access control and inactive association including authorization failure.
Therefore, all the information in AGSAL can be configured to report to 61850 client.
16.13 Security events on protocols SECALARM
16.13.1 Security alarm SECALARM
16.13.2 Signals
Table 485: SECALARM Output signals
Name
Type Description
EVENTID INTEGER EventId of the generated security event
SEQNUMBER INTEGER Sequence number of the generated security event
16.13.3 Settings
Table 486: SECALARM Non group settings (basic)
Name
Values (Range) Unit Step Default Description
Operation Off
On
- - On Operation On/Off
Section 16 1MRK 502 048-UEN A
Station communication
614
Technical manual