17.14 FTP access with password FTPACCS
17.14.1 Identification
Function description
IEC 61850
identification
IEC 60617
identification
ANSI/IEEE C37.2
device number
FTP access with SSL FTPACCS - -
17.14.2 FTP access with SSL FTPACCS
The FTP Client defaults to the best possible security mode when trying to negotiate
with SSL.
The automatic negotiation mode acts on port number and server features. It tries to
immediately activate implicit SSL if the specified port is 990. If the specified port is
any other, it tries to negotiate with explicit SSL via AUTH SSL/TLS.
Using FTP without SSL encryption gives the FTP client reduced capabilities. This
mode is only for accessing disturbance recorder data from the IED.
If normal FTP is required to read out disturbance recordings, create a
specific account for this purpose with rights only to do File transfer.
The password of this user will be exposed in clear text on the wire.
17.14.3 Settings
Table 524: FTPACCS Non group settings (basic)
Name
Values (Range) Unit Step Default Description
PortSelection None
Front
LAN1
Front+LAN1
-
- Front+LAN1 Port selection for communication
SSLMode FTP+FTPS
FTPS
- - FTPS Support for AUTH TLS/SSL
TCPPortFTP 1 - 65535 - 1 21 TCP port for FTP and FTP with Explicit
SSL
TCPPortFTPS 1 - 65535 - 1 990 TCP port for FTP with Implicit SSL
Section 17 1MRK 502 048-UEN A
Basic IED functions
652
Technical manual
To Next Page
Loading...
