Channels 31-40 are not shown in LHMI. They are used for internally
calculated analog signals.
14.4.4.3 Signals
Table 392: A4RADR Input signals
Name Type Default Description
INPUT31 REAL 0 Analog channel 31
INPUT32 REAL 0 Analog channel 32
INPUT33 REAL 0 Analog channel 33
INPUT34 REAL 0 Analog channel 34
INPUT35 REAL 0 Analog channel 35
INPUT36 REAL 0 Analog channel 36
INPUT37 REAL 0 Analog channel 37
INPUT38 REAL 0 Analog channel 38
INPUT39 REAL 0 Analog channel 39
INPUT40 REAL 0 Analog channel 40
14.4.4.4 Settings
Table 393: A4RADR Non group settings (basic)
Name
Values (Range) Unit Step Default Description
Operation31 Off
On
- - Off Operation On/off
Operation32 Off
On
- - Off Operation On/off
Operation33 Off
On
- - Off Operation On/off
Operation34 Off
On
- - Off Operation On/off
Operation35 Off
On
- - Off Operation On/off
Operation36 Off
On
- - Off Operation On/off
Operation37 Off
On
- - Off Operation On/off
Operation38 Off
On
- - Off Operation On/off
Operation39 Off
On
- - Off Operation On/off
Operation40 Off
On
- - Off Operation On/off
FunType31 0 - 255 - 1 0 Function type for analog channel 31
(IEC-60870-5-103)
Table continues on next page
Section 14 1MRK 502 048-UEN A
Monitoring
518
Technical manual
To Next Page
Loading...
