ABB REG650 - Product Information; Identification; Functionality; Settings

Name Values (Range) Unit Step Default Description
UnitName 0 - 18 - 1 Unit name Unit name
UnitNumber 0 - 99999 - 1 0 Unit number
IEDMainFunType 0 - 255 - 1 0 IED main function type for
IEC60870-5-103
TechnicalKey 0 - 18 - 1 AA0J0Q0A0 Technical key
17.7 Product information
17.7.1 Identification
Function description IEC 61850
identification
IEC 60617
identification
ANSI/IEEE C37.2
device number
Product information PRODINF - -
17.7.2 Functionality
The Product identifiers function identifies the IED. The function has seven pre-set,
settings that are unchangeable but nevertheless very important:
• IEDProdType
• ProductVer
• ProductDef
• SerialNo
• OrderingNo
• ProductionDate
The settings are visible on the local HMI , under Main menu/Diagnostics/IED
status/Product identifiers
They are very helpful in case of support process (such as repair or maintenance).
17.7.3 Settings
The function does not have any parameters available in the local HMI or PCM600.
17.8 Primary system values PRIMVAL
17.8.1 Identification
Function description
IEC 61850
identification
IEC 60617
identification
ANSI/IEEE C37.2
device number
Primary system values PRIMVAL - -
1MRK 502 048-UEN A Section 17
Basic IED functions
637
Technical manual