ABB REL650 - Application

Function description IEC 61850
identification
IEC 60617
identification
ANSI/IEEE C37.2
device number
Controllable gate function block GATE - -
Function description IEC 61850
identification
IEC 60617
identification
ANSI/IEEE C37.2
device number
Exclusive OR function block XOR - -
Function description IEC 61850
identification
IEC 60617
identification
ANSI/IEEE C37.2
device number
Logic loop delay function block LOOPDELAY - -
Function description IEC 61850
identification
IEC 60617
identification
ANSI/IEEE C37.2
device number
Timer function block TIMERSET - -
Function description IEC 61850
identification
IEC 60617
identification
ANSI/IEEE C37.2
device number
AND function block AND - -
Function description IEC 61850
identification
IEC 60617
identification
ANSI/IEEE C37.2
device number
Set-reset memory function block SRMEMORY - -
Function description IEC 61850
identification
IEC 60617
identification
ANSI/IEEE C37.2
device number
Reset-set with memory function block RSMEMORY - -
13.4.2 Application
A set of standard logic blocks, like AND, OR etc, and timers are available for adapting the
IED configuration to the specific application needs.
There are no settings for AND gates, OR gates, inverters or XOR gates.
For normal On/Off delay and pulse timers the time delays and pulse lengths are set from
the local HMI or via the PST tool.
Section 13 1MRK 506 334-UUS A
Logic
420
Application manual