IEC11000056 V1 EN
Figure 219: SMT: GOOSE receive function block with converted signals
16.1.3 Setting guidelines
There are two settings related to the IEC 61850–8–1 protocol:
Operation User can set IEC 61850 communication to Enabled or Disabled.
GOOSE has to be set to the Ethernet link where GOOSE traffic shall be send and received.
IEC 61850–8–1 specific data (logical nodes etc.) per included function in
an IED can be found in the communication protocol manual for IEC
61850–8–1.
Section 16 1MRK 506 334-UUS A
Station communication
464
Application manual
To Next Page
Loading...
