IEC08000174 V1 EN
Figure 218: SMT: GOOSE marshalling with SMT
GOOSE receive function blocks extract process information, received by the data set, into
single attribute information that can be used within the application configuration. Crosses
in the SMT matrix connect received values to the respective function block signal in SMT,
see
Figure 219
The corresponding quality attribute is automatically connected by SMT.
This quality attribute is available in ACT, through the outputs of the
available GOOSE function blocks.
1MRK 506 334-UUS A Section 16
Station communication
463
Application manual
To Next Page
Loading...
