ABB REL650 - Setting Guidelines

13.6.3 Setting guidelines
The function does not have any parameters available in Local HMI or Protection and
Control IED Manager (PCM600).
13.7 Boolean 16 to integer conversion with logic node
representation B16IFCVI
13.7.1 Identification
Function description IEC 61850
identification
IEC 60617
identification
ANSI/IEEE C37.2
device number
Boolean 16 to integer conversion with
logic node representation
B16IFCVI - -
13.7.2 Application
Boolean 16 to integer conversion with logic node representation function B16IFCVI is
used to transform a set of 16 binary (logical) signals into an integer. B16IFCVI can receive
an integer from a station computer – for example, over IEC 61850–8–1. These functions
are very useful when you want to generate logical commands (for selector switches or
voltage controllers) by inputting an integer number. B16IFCVI has a logical node
mapping in IEC 61850.
13.7.3 Setting guidelines
The function does not have any parameters available in the local HMI or Protection and
Control IED Manager (PCM600).
13.8 Integer to boolean 16 conversion IB16A
13.8.1 Identification
Function description
IEC 61850
identification
IEC 60617
identification
ANSI/IEEE C37.2
device number
Integer to boolean 16 conversion IB16A - -
Section 13 1MRK 506 334-UUS A
Logic
424
Application manual