- 73 - UMC22-FBP
Universal Motor Controller UMC22-FBP
Software version 4.0
FieldBusPlug / Issue: 02.2008
V 6
Chapter 5.4~2, 5.5~1, 5.6~1 and 5.7~1
5.4 Digital outputs (continued)
Supply power down/up, behaviour:
Valid for all motor controlling
Control functions, but not for
Transparent and Overload relay.
Whenever the supply voltage of the
UMC22 is switched off and on, the start
of the motor needs a new 0 to 1 transiti-
on of the RUN signal.
5.5 Thermistor motor protection (PTC - binary)
Broken wire resistance > 5 k⏲
Response resistance 3.4-3.8 k⏲
Reset resistance 1.5-1.8 k⏲
Short-circuit trip resistance < 15-27 ⏲ (incl. PTC connection wires)
Response time 800 ms
Max. cold resistance of PTC sensor chain < 1.5 k⏲
Line lenght 2.5 mm
2
2 x 250 m
1.5 mm
2
2 x 150 m
0.5 mm
2
2 x 50 m
Isolation no
5.6 FieldBusPlug connection
Mounting Plug connection, fastening with sup-
plied screw
Tightening torque of the fi xing screw 0.8 Nm + rotation 90 degree
Suitable ABB FieldBusPlug types
for
PROFIBUS DP PDP21-FBP, PDP22-FBP, PDQ22-FBP
Devicenet DNP21-FBP
MODBUS MRP21-FBP
AS-Interface ASP22-FBP
5.7 Environmental and mechanical data
Mounting on DIN rail (EN 50022-35) or with 4
screws M4
see chapter 5.7
Mounting position no restrictions
Dimensions (W x H x D) 70 x 105 x110 mm (incl. FieldBusPlug
and Control Panel)
Netto weight 0.39 kg
(current transformer + controller unit)
Wire size (rigid or fi ne-strand) terminals 0,2 - 2.5 mm² / 22 - 14 AWG
Tightening torque 0.4 Nm
Degree of protection IP 20
Temperature range storage -25 ... +70 °C
operation 0 ... +55 °C
Approvals CE, UL, CSA
Approvals (planned) GL, BV, LRS
To Next Page
Loading...
