ABB UMC22-FBP - 7.1 Transparent

- 78 -
UMC22-FBP
Universal Motor Controller UMC22-FBP
Software version 4.0
FieldBusPlug / Issue: 02.0008
V 6
UMC22
0
V
10
24
V
11
24
V
12
DI
0
13
DI
1
14
DI
2
15
DI
3
16
DI
4
17
DI
5
18
5
DO
C
T1 T2 7
DO
0
6
DO
C
8
DO
1
9
DO
2
0 V 24 V DI0 DI1 DI2 DI3 DI4 DI5 24 V 24 V
DO0 DO1 DO2 230 V T1 T2 690 / 400 V
external
supply
supply
inputs
Control Panel
Fault
transparent to the fieldbus
2CDC 342 016 F0207
7.1 Transparent
The UMC22 parametrized with the Control function = Transparent (default) behaves like an I/O-module
with an integrated overload check. The outputs DO0 ... DO2 and the inputs DI0 ... DI5 are directly
connected to the fi eldbus and are independent of the overload status.
7.1.1 Circuit diagrams
7.1.1.1 Basis circuit
Parameters to be changed (4.3.4) (based on default)
 Address via Control Panel or via Addressing Set
If protection function is used:

Set current 1
 Overload protection parameters (e.g. 4.3.4~11)
Illustration 7-2: UMC22-FBP: Control function = Transparent (Basis circuit)
Chapter 7.1.1~1 Transparent