Operation Manual / 2 Safety / A100-L, A200-L
Page 4 /
© Copyright 2016 ABB. All rights reserved.
1.3 Definition of mandatory signs
to protect against
mechanical hazard and risk of fall-
ing
Table 1: Personal protective equipment to be worn at all times
To be worn specific to the respective task
to protect against
- Mechanical hazard
- Chemical hazard
- Thermal hazard
to protect against
- Dusts
- Gases
Table 2: Personal protective equipment to be worn specific to the respective task
1.4 Definition of safety instructions
Non-compliance or inaccurate compliance with working or operating instruc-
tions indicated by this symbol and the word
can lead to serious
injuries to personnel and even to fatal accidents.
Warning signs must always be observed.
Non-compliance or inaccurate compliance with working or operating instruc-
tions indicated by this symbol and the word
can lead to serious
damage to engine or property with grave consequences.
Caution signs must always be observed
.
To Next Page
Loading...
Need help?
General
