1
1 INTRODUCTION
10
Safety Warnings and Precauons
Please read the following safety instrucons carefully to avoid any misuse.
Only use the m-PIMA™ Analyser as described in this document.
Only use the Power transformer and A/C power cord supplied with the
m-PIMA™ Analyser. Any other power supplies can damage the instrument
and may cause hazards.
The m-PIMA™ Analyser is designed to be used in combinaon with
m-PIMA™ test cartridges only. Do not insert any other cartridges, test strips
or devices into the instrument.
Plug in the power cord only in grounded power sockets.
Place the m-PIMA™ Analyser where you can easily disconnect it from mains
A/C power at any me.
Turn the back of the m-PIMA™ Analyser to the front for easy access to
ports and main switch. Do not lt forward the instrument for beer access
since this may result in considerable damage to the front door and housing.
Do not open the m-PIMA™ Analyser. Any unauthorized opening of the
instrument can cause potenal hazards and will invalidate warranty claims.
Only insert the USB Printers or other authorized devices, e.g. Connecvity
Packs IV into the USB ports of the m-PIMA™ Analyser.
Use only one USB storage device at a me.
Only use FAT32 formaed storage/ export devices.
Do not plug in bulky USB devices next to each other since this may damage
the USB ports.
To Next Page
Loading...
Need help?
General
