EN - 2
English Translation of the original operating instructions TCS-Compact
EN English Translation of the original operating instructions
© The manufacturer reserves the right, at any time and without prior notice, to make such changes and amendments to these
Operation Instructions which may become necessary due to misprints, inaccuracies or improvements to the product. Such
changes will however be incorporated into subsequent editions of the Instructions. All trademarks mentioned in the operating
instructions are the property of their respective owners.
1 Identification EN-3
1.1 EU Declaration of Conformity EN-3
1.2 Responsibilities of the User EN-3
2 Product description EN-3
2.1 Designated use EN-3
2.2 Use contrary to the designated use EN-3
2.3 Technical Data EN-4
2.4 Abbreviations EN-6
2.5 Nameplate EN-7
3 Safety instructions EN-7
3.1 Classification EN-7
3.2 Emergency information EN-7
3.3 Safety symbols marking EN-8
4 Scope of delivery EN-8
4.1 Transport EN-8
4.2 Storage EN-8
5 Functional description EN-9
5.1 Injection unit sub-assembly EN-10
5.2 Wire cutting device sub-assembly EN-11
5.3 Sub-assemblies accessories / options EN-11
6 Putting into operation EN-12
6.1 Electrical connection EN-14
6.2 Injection unit EN-14
6.2.1 Adjusting the anti-spatter fluid EN-16
6.2.2 Wire cutting device EN-18
6.2.3 Fastening the cutting prism EN-19
6.2.4 Mounting the milling cutter EN-20
6.2.5 Setting up the clamping position EN-21
6.3 Setting up the compressed air-motor EN-22
6.3.1 Height adjustment EN-23
6.4 Establishing the electrical connection EN-24
6.5 Flow chart EN-25
6.6 Connecting the pneumatic system EN-27
7 Operation EN-28
8 Putting out of operation EN-28
9 Maintenance and cleaning EN-28
9.1 Weekly maintenance EN-29
9.2 Monthly cleaning EN-29
10 Troubleshooting EN-29
10.1 Cleaning unit TCS-Compact EN-29
10.2 Injection unit EN-29
10.3 Wire cutting device EN-30
11 Dismounting EN-30
12 Disposal EN-30
12.1 Materials EN-30
12.2 Consumables EN-31
12.3 Packaging EN-31
13 Notizen/Notes EN-32
To Next Page
Loading...
