44
RTCA SP Instrument Operator’s Manual
D
D
D Maintenance and Care
1. General Maintenance
e RTCA SP Instrument is maintenance-free.
ere are no user serviceable parts inside the RTCA Analyzer or the RTCA SP Station.
If the system will not be used for a long period of time (a month or more), pack the
RTCA Analyzer and the RTCA SP Station into the original plastic bags inside the
shipment boxes.
When you are ready to use the instrument again, please refer to the Installation section for
details on unpacking and installation.
e surface of the RTCA Analyzer and RTCA SP Station should be cleaned and wiped
with a towel or tissue paper that has been lightly soaked in 80% alcohol. Ensure that
this is done for the RTCA SP Station to be placed inside an incubator.
Avoid spraying any sterilizing agent directly on any part of the RTCA SP Instrument,
except Contact Pin cleaning (see Cleaning and Exchanging the RTCA Contact Pins
96)!
General Maintenance
RTCA SP Instrument Operator’s Manual
e RTCA SP Instrument is maintenance-free.
ere are no user serviceable parts inside the RTCA Analyzer or the RTCA SP Station.
If the system will not be used for a long period of time (a month or more), pack the
RTCA Analyzer and the RTCA SP Station into the original plastic bags inside the
When you are ready to use the instrument again, please refer to the
details on unpacking and installation.
e surface of the RTCA Analyzer and RTCA SP Station should be cleaned and wiped
with a towel or tissue paper that has been
soaked in 80% alcohol. Ensure that
lightly soaked in 80% alcohol. Ensure that lightly
this is done for the RTCA SP Station to be placed inside an incubator.
Avoid spraying any sterilizing agent directly on any part of the RTCA SP Instrument,
except Contact Pin cleaning (see
Cleaning and Exchanging the RTCA Contact Pins
To Next Page
Loading...
