8
RTCA SP Instrument Operator’s Manual
X. Use of the Instrument Operator’s Manual
is Operator’s Manual describes the operation of the RTCA SP Instrument and contains
the following chapters:
Chapter A Overview contains a short introduction to the operation of the RTCA SP In-
strument and describes the instrument’s speci cations.
Chapter B System Description contains the description of the RTCA SP instrument, and
the instructions on the installation of the instrument.
Chapter C Operation describes the operating procedures for the RTCA SP Instrument.
Chapter D Maintenance and Care describes the maintenance procedures that are requi-
red for the RTCA SP Instrument.
Chapter E Appendix contains trouble shooting and ordering information of the RTCA
SP Instrument, accessories and consumables.
XI. Conventions Used in this Manual
Text Conventions
To impart information that is consistent and memorable, the following text conventions
are used in this Operator’s Manual:
Numbered Listing Describes the steps in a procedure that must be performed
in the order listed.
Italic type, gold Points to a different chapter in this Operator’s Manual
which should be referred to for better understanding.
Italic type Describes buttons, icons or functions when operating
the RTCA Software. In addition, important notes and
information notes are shown in italic type.
Use of the Instrument Operator’s Manual
To Next Page
Loading...