Acer Aspire Z3801 - Mainboard Cover Removal; Mainboard Cover Installation

3-30 Machine Maintenance Procedures
Mainboard Cover Removal 0
Prerequisite:
Rear Cover Removal
1. Locate mainboard cover (A) on front cover. (Figure 3-30)
Figure 3-30. Mainboard Cover
2. Disconnect the following cables:
HDD cable (D) from mainboard connector (C)
HDD cable (E) from mainboard connector (F)
3. Remove screws (B) from mainboard cover.
4. Remove mainboard cover.
Mainboard Cover Installation 0
1. Install mainboard cover (A) to front cover. (Figure 3-30)
2. Install and secure screws (B) to mainboard cover.
3. Connect the following cables:
HDD cable (D) to mainboard connector (C)
HDD cable (E) to mainboard connector (F)
4. Install rear cover.
ID Size Quantity Screw Type
B M3.0x4.0 4
A
E
D
B
F
C
B