System Utilities 2-25
Using the LAN MAC EEPROM Utility 0
When the MAC Address is removed, the LAN MAC EEPROM Utility is required to rewrite the
MAC address to the mainboard.
1. Insert a bootable USB HDD.
2. Copy the MACID file to the bootable USB HDD root directory.
3. Reboot the computer.
4. Press F12 during boot to enter Setup Menu.
5. Select USB HDD as the boot device and press Enter. (Figure 2-31)
Figure 2-31. Boot Device Window
6. After the USB HDD has booted, type cd macid. (Figure 2-32)
Figure 2-32. MACID.BAT
7. Type A:\MACID\WRITEID.BAT.
Please Select boot device
SATA: ST3250318AS
SATA: Slimtype BD E DS6E2SH
USB HDD
Enter Setup
and to move selection
ENTER to select boot device
ESC to boot using defaults
To Next Page
Loading...
