Acer Aspire Z3801 - LVDS Cable Removal; LVDS Cable Installation

Machine Maintenance Procedures 3-49
LVDS Cable Removal 0
Prerequisite:
LCD Panel Removal
1. Locate LVDS cable (A) on LCD panel. (Figure 3-50)
Figure 3-50. LVDS Cable
CAUTION:
!
LVDS cable is connected to LCD panel. Use caution when removing cable.
2. Remove LVDS cable from adhesive on LCD panel.
3. Peel tape (B) covering LVDS cable to LCD panel connector. (Figure 3-51)
Figure 3-51. LVDS Tape
4. Disconnect LVDS cable from LCD panel connector (C).
LVDS Cable Installation 0
1. Connect LVDS cable (A) to LCD panel connector (C). (Figure 3-51)
2. Secure tape (B) to cover LVDS cable and LCD panel connector.
3. Secure LVDS cable to adhesive on LCD panel. (Figure 3-50)
4. Install LCD panel
A
B
C