Machine Maintenance Procedures 3-13
4. Open module clips (F) to unlock DIMM. (Figure 3-10)
Figure 3-10. DIMM
5. Disconnect DIMM (E) from mainboard connector (D).
6. Repeat steps 4 and 5 for remaining DIMM (G).
DIMM Installation 0
1. Connect DIMM (G) into mainboard connector (D). (Figure 3-10)
2. Press on DIMM until clips (F) lock in place.
3. Repeat steps 4 and 5 for DIMM (E).
4. Install DIMM door (A) to mainboard cover (B). (Figure 3-9)
5. Install and secure screw (C) to DIMM door.
6. Install rear cover.
ID Size Quantity Screw Type
C M3.0x4.0 1
To Next Page
Loading...
