Acer Aspire Z3801 - Mainboard Installation

Machine Maintenance Procedures 3-45
Mainboard Installation 0
NOTE:
NOTE:
Make sure all cables are clear when installing mainboard.
1. Align and install mainboard (P) with guide pins (Q) on front cover. (Figure 3-46)
2. Install and secure screws (N) to mainboard.
3. Connect the following cables: (Figure 3-45)
Touch board cable (G) to mainboard connector (g)
LED switch board cable (H) to mainboard connector (h)
ODD cable (J) to mainboard connector (j)
LVDS cable (K) to mainboard connector (k)
Camera cable (M) to mainboard connector (m)
4. Connect the following cables: (Figure 3-44)
Left light bar cable (A) to mainboard connector (a)
Speaker cable (B) to mainboard connector (b)
Infrared board cable (C) to mainboard connector (c)
Power board cable (D) to mainboard connector (d)
Right light bar cable (E) to mainboard connector (e)
Converter board cable (F) to mainboard connector (f)
5. Install CPU, RTC Battery, WLAN Module and DIMM.
ID Size Quantity Screw Type
N M3.0x4.0 7