Acer Aspire Z3801 - Fan Module Removal; Fan Module Installation

3-34 Machine Maintenance Procedures
Fan Module Removal 0
Prerequisite:
Mainboard Cover Removal
1. Locate fan module (A). (Figure 3-34)
Figure 3-34. Fan Module
2. Disconnect fan cable (B) from mainboard connector (C).
3. Remove cable from guide (D) on front cover.
4. Remove screws (E) from fan module.
5. Remove fan module.
Fan Module Installation 0
1. Install fan module (A) to front cover. (Figure 3-34)
2. Install and secure screws (E) to front cover.
3. Secure fan cable (B) to guide (D) on front cover.
4. Connect fan cable to mainboard connector (C).
5. Install mainboard cover.
ID Size Quantity Screw Type
E M3.0x6.0 3
E
A
B
C
D