Acer Aspire Z3801 - WLAN Module Removal; WLAN Module Installation

Machine Maintenance Procedures 3-31
WLAN Module Removal 0
Prerequisite:
Mainboard Cover Removal
1. Locate WLAN module (A) on mainboard. (Figure 3-31)
Figure 3-31. WLAN Module
2. Disconnect WLAN main (C) and auxiliary (D) antenna cables from WLAN module.
3. Remove screw (E) from module.
4. Disconnect WLAN module (A) from mainboard connector (B).
WLAN Module Installation 0
1. Connect WLAN module (A) into mainboard connector (B). (Figure 3-31)
2. Install and secure screw (E) to module.
3. Connect WLAN main (C) and auxiliary (D) antenna cables to WLAN module.
4. Install mainboard cover.
ID Size Quantity Screw Type
E M2.0x3.0 1
A
B
C
D
E