Acer Aspire Z3801 - HDD Module Removal

3-26 Machine Maintenance Procedures
HDD Module Removal 0
Prerequisite:
Rear Cover Removal
1. Locate HDD module (A) on front cover. (Figure 3-25)
Figure 3-25. HDD Module
2. Disconnect the following cables:
HDD cable (D) from mainboard connector (E)
HDD cable (G) from mainboard connector (F)
3. Remove HDD cables (D) and (G) from guide (H).
4. Remove screw (B) from ground cable (C) on HDD module.
5. Slide and remove HDD module.
A
B
C
D
E
G
F
H