3-42 Machine Maintenance Procedures
Light Bar Module Removal 0
Prerequisite:
Light Bar Cover Removal
1. Locate left light bar module (A) inside light bar cover (B). (Figure 3-43)
Figure 3-43. Left Light Bar Module
2. Move and hold latch (C) on light bar cover.
3. Remove left light bar module from guides.
4. Repeat steps 2 and 3 to remove right light bar module (D).
Light Bar Module Installation 0
1. Align and install left light bar module (A) with guides on light bar cover. (Figure 3-43)
2. Press on left light bar module until secure under latch (C).
3. Repeat steps 1 and 2 to install right light bar module (D).
4. Install light bar cover.
To Next Page
Loading...
