Machine Maintenance Procedures 3-41
Light Bar Cover Removal 0
Prerequisite:
Mainboard Cover Removal
1. Remove screws (A) from front cover. (Figure 3-41)
Figure 3-41. Front Cover Screws
2. Turn front cover over.
3. Remove light bar cover (B). (Figure 3-42)
Figure 3-42. Light Bar Cover
Light Bar Cover Installation 0
1. Install light bar cover (B) to front cover. (Figure 3-42)
2. Turn front cover over. (Figure 3-41)
3. Install and secure screws (A) to front cover.
4. Install LCD panel.
ID Size Quantity Screw Type
C M3.0x6.0 5
To Next Page
Loading...
