Machine Maintenance Procedures 3-21
4. Turn camera module over. (Figure 3-20)
Figure 3-20. Camera Module Cable
5. Disconnect camera module cable (E) from module connector (F).
Camera Module Installation 0
1. Connect camera module cable (E) to module connector (F). (Figure 3-20)
2. Turn camera module over.
3. Install camera module (D) to front cover. (Figure 3-19)
4. Install camera brackets (B) and (C) to front cover. (Figure 3-18)
5. Install and secure screws (A) to brackets.
6. Install rear cover.
ID Size Quantity Screw Type
A M3.0x4.0 2
To Next Page
Loading...
