Machine Maintenance Procedures 3-29
LCD Stand Removal 0
Prerequisite:
Rear Cover Removal
1. Locate LCD stand (A) on front cover. (Figure 3-28)
Figure 3-28. LCD Stand
2. Remove screws (B) from LCD stand.
3. Remove LCD stand from front cover.
LCD Stand Installation 0
1. Install LCD stand (A) to slots (C) on front cover. (Figure 3-29)
Figure 3-29. LCD Stand Slots
2. Install and secure screws (B) to LCD stand. (Figure 3-28)
3. Install rear cover.
ID Size Quantity Screw Type
B M3.5x8.9 4
To Next Page
Loading...
