System Utilities 2-17
6. Go to the BIOS flash folder and type DOS.
7. Execute FBB to update BIOS. (Figure 2-16)
Figure 2-16. Executing Batch File
During update, do not press any keys.
The BIOS flash process begins. (Figure 2-17)
Figure 2-17. Flashing BIOS
The EC firmware updates. (Figure 2-18)
Figure 2-18. Updated EC Firmware
8. When flash is complete, system will restart automatically when finished.
9. Press DEL to enter setup when the splash screen displays. Check to see if BIOS is
correct.
10. Press F9 to load default settings.
11. Press F10 to save the default settings and exit BIOS setup.
To Next Page
Loading...
