ACIST RXI - Summary of ACIST Menu Options

Summary of ACIST Menu Options
66 | ACIST RXi System User’s Guide 901700-001,01 2019-09 English
System Information and Settings
e following table summarizes the System Settings available through the
ACIST menu.
Menu Option Purpose
System Information Displays Software Version Number, Date,
and Time
System Settings: Language To select a supported language
System Settings: Date To change the system date
(month, day and year)
System Settings: Time To change the system time
(hours and minutes)
System Settings: Facility Name To enter a facility name
System Settings: Lab ID To provide a Lab ID and indicate if the
system is stationary or mobile
System Settings: Monitor Output
Sensitivity
To change the monitor output sensitivity
System Settings: Audio Volume To change the audio volume setting and
decide if a sound should accompany
button presses on the touchscreen
System Settings: Touchscreen
Calibration
To calibrate the touchscreen
System Settings: Install Software To install software upgrades from a USB
memory device that has valid software
Waveform Settings: Mean Pressure
Calculation
To change the current heartbeat count
used for the mean pressure calculation
Waveform Settings: Sweep Speed To change the current sweep speed
Waveform Settings: Graph Scale
Maximum
To change the graph scale maximum
Pa Scaling To adjust the aortic pressure value to
match the value on the hemodynamic
system
Waveform Settings: Restore Defaults To restore the factory settings for
Waveform Settings (Mean Pressure
Calculation, Sweep Speed, and Graph
Scale Maximum) as well as Venous
Pressure
Patient ID To enter a patient ID
Zero Pressure Sensor To set the current pressure value to zero
Summary of ACIST
Menu Options