►with second control button move the dip-switch n° 5 to the ON position
PLEASE NOTE
After modication, each tubehead is controlled by the relevant button.
To change the cone installed, move the dip-switch n° 6:
DIP SWITCH 6
ON
OFF
►with short cone (8”=20cm (SSD)) move the dip-switch 6 to the OFF position
►with long cone (12”=31cm (SSD)) move the dip-switch 6 to the ON position
PLEASE NOTE
After modication, the set exposure times are automatically changed.
To Next Page
Loading...
