Retain This Manual In A Safe Place
For Future Reference
Please read this manual carefully to thoroughly familiarize yourself with the Phase 7 Dual Microprocessor
Controller (DMC) computer system features, operational instructions, and programming characteristics.
This manual contains important information on how to employ ALL the features of your new ADC dryer
in the safest and most economical way.
American Dryer Corporation products embody advanced concepts in engineering, design, and safety.
If this product is properly maintained, it will provide many years of safe, efficient, and trouble-free
operation.
We have tried to make this manual as complete as possible and hope you will find it useful. ADC
reserves the right to make changes from time to time, without notice or obligation, in prices, specifications,
colors, and material, and to change or discontinue models.
▲ WARNING
!
WARNING
Power must be disabled prior to changing S.A.F.E. system temperature probe!! The S.A.F.E. system
will be activated if probe is removed while dryer is powered on.
Proposition 65
Use of this product could expose you to substances from fuel combustion
that contain chemicals known to the State of California to cause cancer,
birth defects and other reproductive harm.
“IMPORTANT NOTE TO PURCHASER”
Information must be obtained from your local gas supplier on the instructions to be followed if the user
smells gas. These instructions must be posted in a prominent location near the dryer.
In the State of Massachusetts, the following installation instructions apply:
■ Installations and repairs must be performed by a qualified or licensed contractor,
plumber, or gasfitter qualified or licensed by the State of Massachusetts.
■ If using a ball valve, it shall be a T-handle type.
■ A flexible gas connector, when used, must not exceed 3 feet.
NOTE
If power to the dryer is off, the S.A.F.E. system is disabled.
To Next Page
Loading...
