ADC AD-320 - Selecting Buzzer Mode

29
SELECTING BUZZER MODE
PRESS "MED" TO
ENTER PL #01
CONTROL SETTINGS.
PRESS "HI" TWO (2)
TIMES TO SCAN UP TO
BEEP COUNT
PARAMETER.
PRESS "HI" OR "LO" TO
TOGGLE BUZZER MODE ON
AND OFF.
PRESS "MED" TO
ENTER BUZZER MODE
PARAMETER.
PRESS "MED" TO
SELECT BUZZER MODE,
AND ADVANCE TO
NEXT PARAMETER.
NOTE: PRESS "PAUSE" TO
EXIT PL #01 CONTROL
SETTINGS MEMORY
LOCATION
PRESS "MED" TO
ENTER PROGRAM
MENU.
FROM READY MODE
TOGGLE PROGRAM
SWITCH TO UP
POSITION.
PROGRAM MODE
PL #01
CONTROL
SETTINGS
SELECT
LANGUAGE
BUZZER MODE
ON
OFF
SELECT BEEP
COUNT
READY, INSERT
0.25 ¢ TO START