ADC AD-320 - Selecting Ready Prompt

33
SELECTING READY
PROMPT
PRESS "MED" TO
ENTER PL #01
CONTROL SETTINGS.
PRESS "HI" SIX (6)
TIMES TO SCAN UP TO
READY PROMPT
PARAMETER.
PRESS "MED" TO
SELECT READY
PROMPT AND ADVANCE
TO NEXT PARAMETER.
PRESS "HI" OR "LO" TO
TOGGLE BETWEEN
“READY-INSERT AMOUNT
TO START” AND “READY”.
PRESS "MED" TO
ENTER READY PROMPT
PARAMETER.
NOTE: PRESS "PAUSE" TO
EXIT PL #01 CONTROL
SETTINGS MEMORY
LOCATION
PRESS "MED" TO
ENTER PROGRAM
MENU.
FROM READY MODE
TOGGLE PROGRAM
SWITCH TO UP
POSITION.
PROGRAM MODE
PL #01
CONTROL
SETTINGS
SELECT
LANGUAGE
READY PROMPT
READY-INSERT
AMOUNT TO
START
READY
PL#02
MACHINE
SETTINGS
READY, INSERT
0.25 ¢ TO START