ADC AD-320 - Selecting Model Type

34
SELECTING MODEL TYPE
PRESS "MED" TO
ENTER PL #02 MACHINE
SETTINGS.
PRESS "HI" ONE (1)
TIME TO SCAN UP TO
PL #02 MACHINE
SETTINGS.
PRESS "MED" TO
ENTER MODEL TYPE
PARAMETER.
PRESS "HI" OR "LO" TO SCAN
THROUGH THE DIFFERENT
MODEL TYPES- GAS DUAL
MOTOR, ELECTRIC DUAL
MOTOR, STEAM DUAL
MOTOR, GAS QUAD MOTOR,
ELECTRIC QUAD MOTOR,
STEAM QUAD MOTOR.
PRESS "MED" TO
SELECT MODEL
TYPE AND
ADVANCE TO NEXT
PARAMETER.
PRESS "MED" TO
ENTER PROGRAM
MENU.
FROM READY MODE
TOGGLE PROGRAM
SWITCH TO UP
POSITION.
NOTE: PRESS “PAUSE” TO
EXIT PL #02 MACHINE
SETTINGS MEMORY
LOCATION
PROGRAM MODE
PL #01
CONTROL
SETTINGS
PL #02
MACHINE
SETTINGS
SELECT MODEL TYPE
GAS SINGLE
MOTOR
ELECTRIC
SINGLE MOTOR
ROTATION
SENSOR
READY, INSERT
0.25 ¢ TO START