ADC AD-320 User Manual

39
PRESS "MED" TO
ENTER TIME FOR
AMOUNT TO START
PARAMETER.
PRESS "HI" OR "LO"
TO INCREASE OR
DECREASE TIME FOR
AMOUNT TO START.
PRESS "MED" TO
SELECT TIME FOR
AMOUNT TO START AND
ADVANCE TO NEXT
PARAMETER.
PRESS "HI" TWO (2)
TIMES TO SCAN UP TO
PL #03 HI KEY
SETTINGS.
PRESS "MED" TO
ENTER PL #03 HI
KEY SETTINGS.
HI KEY- SETTING TIME FOR AMOUNT TO START
PRESS "MED" TO
ENTER PROGRAM
MENU.
FROM READY MODE
TOGGLE PROGRAM
SWITCH TO UP
POSITION.
NOTE: PRESS "PAUSE" TO
EXIT PL #03 HI KEY SETTINGS
MEMORY LOCATION
PROGRAM MODE
PL #01
CONTROL
SETTINGS
PL #03 HI KEY
SETTINGS
TIME FOR AMOUNT TO
START 1 TO 99
MINUTES
10
20
TIME FOR TOP
OFF 1 TO 99
MINUTES
READY, INSERT
0.25 ¢ TO START

ADC AD-320 Specifications

General

Brand	ADC
Model	AD-320
Category	Controller
Language	English