49
LO KEY- SETTING DRY TEMP 100 TO 190 °F *
PROGRAM MODE
PL #01
CONTROL
SETTINGS
PL #05 LO KEY
SETTINGS
TIME FOR AMOUNT TO
START 1 TO 99
MINUTES
READY, INSERT
0.25 ¢ TO START
PRESS "MED" TO
ENTER PL #05 LO KEY
SETTINGS.
PRESS "HI"
FOUR (4) TIMES
TO SCAN UP
TO PL #05 LO
KEY SETTINGS.
PRESS "MED" TO
ENTER DRY TEMP
PARAMETER.
PRESS "HI" OR
"LO" TO
INCREASE OR
DECREASE DRY
TEMP.
PRESS "MED" TO
SELECT DRY TEMP
AND ADVANCE TO
NEXT
PARAMETER.
PRESS "MED" TO
ENTER
PROGRAM
MENU.
FROM READY MODE
TOGGLE PROGRAM
SWITCH TO UP
POSITION.
NOTE: PRESS "PAUSE" TO
EXIT PL #05 LO KEY
SETTINGS MEMORY
LOCATION
180
190
COOL TIME 0 TO
9 MINUTES
DRY TEMP 100 TO 190
°F
PRESS "HI" TO SCAN
UP TO DRY TEMP
SETTING.
* NOTE- THE MAX TEMP WILL BE
REGULATED BASED ON THE RADIAL
OR AXIAL CONFIGURATION OF DRY.
THE MAX DRYING TEMP FOR A RADIAL
DRYER IS 190 °F AND THE MAX DRYING
TEMP FOR AN AXIAL DRYER IS 150 °F
To Next Page
Loading...
Need help?
General
