ADC AD-320 - Selecting Beep Count

30
SELECTING BEEP COUNT
PRESS "MED" TO
ENTER PL #01
CONTROL SETTINGS.
PRESS "HI" THREE (3)
TIMES TO SCAN UP TO
BEEP COUNT
PARAMETER.
PRESS "HI" OR "LO" TO
INCREASE OR DECREASE
THE BEEP COUNT.
PRESS "MED" TO
ENTER BEEP COUNT
PARAMETER.
PRESS "MED" TO
SELECT NEW BEEP
COUNT, AND ADVANCE
TO NEXT PARAMETER.
NOTE: PRESS "PAUSE" TO
EXIT PL #01 CONTROL
SETTINGS MEMORY
LOCATION
PRESS "MED" TO
ENTER PROGRAM
MENU.
FROM READY MODE
TOGGLE PROGRAM
SWITCH TO UP
POSITION.
PROGRAM MODE
PL #01
CONTROL
SETTINGS
SELECT
LANGUAGE
BEEP COUNT
1 TO 9 BEEPS
1
5
SELECT DRY
MODE
READY, INSERT
0.25 ¢ TO START