ADC AD-320 - Lo Key- Setting Time for Amount to Start

47
PRESS "MED" TO
ENTER TIME FOR
AMOUNT TO START
PARAMETER.
PRESS "HI" OR "LO" TO
INCREASE OR
DECREASE TIME FOR
AMOUNT TO START.
PRESS "MED" TO
SELECT TIME FOR
AMOUNT TO START AND
ADVANCE TO NEXT
PARAMETER.
PRESS "HI" FOUR (4)
TIMES TO SCAN UP TO
PL #05 LO KEY
SETTINGS.
PRESS "MED" TO
ENTER PL #05 LO
KEY SETTINGS.
LO KEY- SETTING TIME FOR AMOUNT TO START
PRESS "MED" TO
ENTER PROGRAM
MENU.
FROM READY MODE
TOGGLE PROGRAM
SWITCH TO UP
POSITION.
NOTE: PRESS "PAUSE" TO
EXIT PL #05 LO KEY
SETTINGS MEMORY
LOCATION
PROGRAM MODE
PL #01
CONTROL
SETTINGS
PL #05 LO KEY
SETTINGS
TIME FOR AMOUNT TO
START 1 TO 99
MINUTES
10
20
TIME FOR TOP
OFF 1 TO 99
MINUTES
READY, INSERT
0.25 ¢ TO START