ADC AD-320 User Manual

50
LO KEY- SETTING COOL TIME 0 TO 9 MINUTES
PROGRAM MODE
PL #01
CONTROL
SETTINGS
PL #05 LO KEY
SETTINGS
TIME FOR AMOUNT TO
START 1 TO 99
MINUTES
READY, INSERT
0.25 ¢ TO START
PRESS "MED" TO
ENTER PL #05 LO KEY
SETTINGS.
PRESS "HI"
FOUR (4) TIMES
TO SCAN UP
TO PL #05 LO
KEY SETTINGS.
PRESS "MED" TO
ENTER COOL TIME
PARAMETER.
PRESS "HI" OR
"LO" TO
INCREASE OR
DECREASE COOL
TIME.
PRESS "MED" TO
SELECT COOL
TIME AND
ADVANCE
TO NEXT
PARAMETER.
PRESS "MED"
TO ENTER
PROGRAM
MENU.
FROM READY MODE
TOGGLE PROGRAM
SWITCH TO UP
POSITION.
NOTE: PRESS "PAUSE" TO
EXIT PL #05 LO KEY
SETTINGS MEMORY
LOCATION
2
5
PL #06 VENDING
PARAMETERS
COOL TIME 0 TO 9
MINUTES
PRESS "HI" TO SCAN
UP TO COOL TIME
SETTING.

ADC AD-320 Specifications

General

Brand	ADC
Model	AD-320
Category	Controller
Language	English