ADC AD-320 - Selecting Dry Mode

31
SELECTING DRY MODE
PRESS "MED" TO
ENTER PL #01
CONTROL SETTINGS.
PRESS "HI" FOUR (4)
TIMES TO SCAN UP TO
SELECT DRY MODE
PARAMETER.
PRESS "MED" TO
ENTER DRY MODE
PARAMETER.
PRESS "MED" TO
SELECT DRY MODE,
AND ADVANCE TO
NEXT PARAMETER.
PRESS "HI" OR "LO" TO
TOGGLE BETWEEN COIN
AND FREE DRY MODE.
NOTE: PRESS "PAUSE" TO
EXIT PL #01 CONTROL
SETTINGS MEMORY
LOCATION
PRESS "MED" TO
ENTER PROGRAM
MENU.
FROM READY MODE
TOGGLE PROGRAM
SWITCH TO UP
POSITION.
PROGRAM MODE
PL #01
CONTROL
SETTINGS
SELECT
LANGUAGE
SELECT DRY
MODE
COIN DRY MODE
FREE DRY MODE
SELECT PAUSE
TIME 0 TO 3
MINUTES
READY, INSERT
0.25 ¢ TO START