ADC AD-320 - Page 165

63
FACTORY DEFAULTS
LANGUAGE ENGLISH
TEMP SCALE °F
BUZZER MODE BUZZ
BEEP COUNT 1 TO 9 BEEPS 5
DRY MODE COIN
PAUSE TIME 0 to 3 MINUTES 1
READY PROMPT READY-INSERT AMOUNT TO START
MODEL reference dryer model type
ROTATION SENSOR ON
LINT CLEANING FREQUENCY 0 TO 10 HOURS 2
AXIAL THERMISTOR INPUT ON
THERMISTOR TEMP SET POINT 100 TO 400 °F 180
TIME FOR AMOUNT TO START 1 TO 99 MINUTES 10
TIME FOR TOP OFF 1 TO 99 MINUTES 10
DRY TEMP 100 TO 190°F 150
COOL TIME 0 TO 9 MINUTES 2
TIME FOR AMOUNT TO START 1 TO 99 MINUTES 10
TIME FOR TOP OFF 1 TO 99 MINUTES 10
DRY TEMP 100 TO 190°F 130
COOL TIME 0 TO 9 MINUTES 2
TIME FOR AMOUNT TO START 1 TO 99 MINUTES 10
TIME FOR TOP OFF 1 TO 99 MINUTES 10
DRY TEMP 100 TO 190°F 120
COOL TIME 0 TO 9 MINUTES 2
CURRENCY SYMBOL USD
VENDING MODE ACCUMULATIVE TIME
VENDING SAFEGUARD BAD COIN RESET
LEFT COIN DENOMINATION 0.05 TO 25.00 * 0.25
RIGHT COIN DENOMINATION 0.05 TO 25.00 * 0.10
AMOUNT TO START 0.05 TO 25.00 0.25
AMOUNT FOR TOP OFF 0.05 TO 25.00 0.25
NO UPPER DRYER FAULTS / UPPER DRYER FAULTS
NO LOW ER DRYER FAULTS / LOWER DRYER FAULTS
PL #06
FAULT RECORDING
PL#07
* Note- This setting will differ depending on the coin acceptor installed on the dryer.
PL#04
LO KEY SETTINGS
PL#05
VENDING PARAMETERS
PL#02
HI KEY SETTINGS
PL#03
MED KEY SETTINGS
For SL-30 Dryer Model.
CONTROL SETTINGS
PL#01
MACHINE SETTINGS