Why is there no live video on my ADT 4-channel DVR?
If you're not seeing live video on your ADT DVR, here are a few things to check: * Ensure the camera video cable and connections are secure. * Verify the monitor video cable and connections are properly connected. * Confirm that the camera is receiving power. * Check the camera lens settings.
How to troubleshoot no power on ADT 4-channel DVR?
If your ADT DVR has no power, check the power cord connections and confirm that there is power at the outlet.
What to do if the icon displays but the ADT DVR is not recording?
If the icon displays, but the ADT DVR isn't recording, it might be in Pre-Event recording mode. In this mode, the yellow icon displays when there is no event, and the DVR is not actively recording. The red icon displays when an event occurs, and the DVR starts recording.
General| Video Input | 4 channels |
|---|---|
| Recording Resolution | Up to 1080p |
| Compression | H.264 |
| Remote Viewing | Yes |
| Operating System | Embedded Linux |
| Power Supply | 12V DC |
| Mobile App Support | Yes |
Covers basic safety rules for operation and handling, including reading instructions, cleaning, and power safety.
Addresses safety during installation, equipment placement, and environmental considerations.
Instructions for environmentally responsible disposal of electronic waste according to EU regulations.
Lists the key capabilities and functionalities of the DVR, such as camera inputs and recording features.
Explains the DVR's technology, digital advantages over VCRs, and basic operational principles.
Lists all items included in the DVR box, such as the DVR, power cord, and manuals.
Specifies the tools needed for setup, noting that no special tools are typically required.
Details all physical input/output connectors like Video In/Out, Alarm, RS485, USB, Network, and their functions.
Describes the operation of all front panel buttons, LEDs, and the infrared remote control for system interaction.
Guides the user through the first-time configuration of the DVR, including essential settings.
Covers core system settings: Information, Date/Time, Storage management, and system Shutdown.
Details network setup, including IP addressing, DVRNS server registration, and WebGuard access.
Configures email or callback alerts for system events, ensuring timely notifications.
Sets up individual devices like cameras, alarm outputs, and display preferences on the DVR.
Sets up recording modes, schedules, resolution, and pre-event recording parameters.
Configures reactions to events like alarm inputs, motion detection, video loss, and system events.
Steps to power up the DVR and view live camera feeds on the attached monitor.
Explains navigation and functions within the live monitoring menu, including sequence and camera options.
Details how to control PTZ cameras for pan, tilt, zoom, and preset positioning using the DVR.
Describes using a USB mouse for navigating menus and controlling DVR functions, offering an alternative to buttons.
Guides on how to record video and play back recorded footage.
Guides on searching and finding specific recorded video segments by time, event, or calendar.
Explains managing multiple video streams due to date/time resets and searching overlapping recordings.
Instructions for remote monitoring and search via web browser using Internet Explorer.
Detailed diagrams and descriptions for I/O and RS485 connector pin assignments.
Provides solutions for common problems like no power, no video, or recording issues.
To Next Page
