EasyManuals Logo

ADT 4-channel DVR User Manual

ADT 4-channel DVR
56 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #39 background imageLoading...
Page #39 background image
4-Channel Digital Video Recorder
31
Chapter 4 Operation
NOTE: This chapter assumes your DVR has been installed and configured. If it has not, please refer to Chapters
2 and 3.
The DVR’s controls are similar to a VCR. As with a VCR, the main functions are recording and playing back video.
However, you have much greater control over recording and playing back video. You can establish recording schedules
based on time of day and day of the week. The DVR allows you to search through the recorded video using much more
sophisticated tools than those available with VCRs. Additional DVR features that are not available with VCRs are
remote control and viewing, and recording video at the same time you are watching previously recorded video.
The front panel controls are described in Chapter 3 Configuration.
Turning on the Power
Once you have installed the DVR following the instructions in Chapter 2 Installation, it is ready to record.
Live Monitoring
As soon as the DVR completes its initialization process, it will begin showing live video on the attached monitor. The
default mode is to display all cameras at once. Pressing any camera button will cause that camera to display full screen.
It displays live video until the user enters another mode.
While in the live monitoring mode, pressing the
MENU button displays the following Live Monitoring menu at the
top of the screen. Pressing the MENU button again hides the menu. You can navigate through menus and items by
pressing the arrow buttons.
Freeze
Sequence
Camera Menu
Alarm Reset
Setup
Search Mode
Login-Logout
Figure 44 Live Monitoring menu.
NOTE: The Live Monitoring menu also can be displayed by moving the mouse pointer to the top of the screen.
Live Monitoring Menu
Freeze
Selecting (Freeze) in the Live Monitoring menu will freeze the current image on the screen until you select again.
It is the same as pressing the
(Play/Pause) button on the front panel. While in the Freeze mode, the icon displays
in bottom-left corner if Freeze is selected in the Display setup screen (OSD tab).

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the ADT 4-channel DVR and is the answer not in the manual?

ADT 4-channel DVR Specifications

General IconGeneral
BrandADT
Model4-channel DVR
CategoryDVR
LanguageEnglish

Related product manuals