To Next Page

To Previous Page

4-Channel Digital Video Recorder

Highlight the box beside Dest. and press the button. You can select the storage device on which you would like to

record the video clip.

The DVR automatically assigns a file name to the video clip. However, you can give the video clip file a different name.

Highlight the box beside File Name and press the

button. A virtual keyboard appears. Enter a file name for the

video you are backing up and select Close. The DVR will automatically add the camera number (for example “01”)

and “.exe” to the file name.

NOTE: When naming a file, you cannot use the following characters: \, /, :, *, ?, “, <, >, |.

Once you have given the video clip a file name, highlight the Start button and press the button. The confirmation

screen displaying data size will appear. When the storage device does not have enough space, the DVR will ask if you

want to copy as much of the video clip as possible in the available space.

Highlight the Continue button and press the button to continue clip copy.

Once the clip copy starts, you can cancel it by selecting Cancel or hide the screen by selecting Close. When selecting

Close, Clip Copy continues and a confirmation screen will display when complete.

NOTE: The file size for clip copy is limited to 30GB. When copying video clips larger than 2GB, the video clips

will be save in units of 2GB. For example, 3 individual 2GB files will be created when saving a 6GB video clip.

However, the file size for the One-Touch Clip Copy is limited to 2GB.

You can use other functions on the DVR while video is being backed up. To do this, highlight the Close button and

press the

button. You can return to the Clip-Copy screen at any time to check the progress.

You do not need to install any special software on your personal computer to review the video clips. Refer to the RAS

manual for instructions on how to review video clips you have copied.

NOTE: During Clip Copy, you cannot shut the system down, clear data on the storage device, or format the

storage device.

Figure 51 ─ Clip-Copy screen.

You can search video from the first to last recorded images, or you can

set the start and stop times and dates.

Highlight the box beside From and press the

(Play/Pause) button to

set a specific Date and Time.

Highlight the box beside To and press the

button to set a specific Date

and Time.

Highlight the box beside Channels and press the button. You can

select the cameras that you would like to include in your video clip.

Highlight the box beside Password and press the button. A virtual

keyboard appears allowing you to enter the password for reviewing the

video clips.

ADT 4-channel DVR User Manual

Questions and Answers: